ab CHF 12.90

Installation Notes Caution: When not fitted to the outer tyre it must not be heavily inflated. Otherwise irreversible damage will occur! Before fitting, please slightly inflate the tyre to check for leaks! When mounting, inflate the tyre by 0.5PSl first.Make sure the inner tube is pressed against theinner wall of the tyre and then press to adjust the tube nflating more than 2psi empty will result in an unrepairable swell. Remember to never exceed 2psi when pumping empty. TPU Ultralight MTB Bike Tube Lightweight / Small / Anti-ageing The advantage of TPU material Endure heat Cold hardy High elasticity Tear resistan 65g Ultralight Long lasting Recyclable Easy to carry parameters Name: MTB inner tube Materials: TPU&Alloy Weight: ~40g/53g/55g/57g Brand: Thinkrider Color: orange Valve:FV45mm Apply to:MTB26*1.35-1.75 MTB26*1.9-2.5 MTB27.5*1.9-2.5 MTB29*1.9-2.5 (Recommended scope of application) "For rim brake and disc brake wheelsets For mountain bikes with 1.9~2.5inches width Tyre "Reduced rolling resistance Lose weight on your tires Reduced spining mass where there are more (wheeksets), more responsive acceleration and resulting improved handingand climbing speed Compact in size lightweight design Improved puncture resistance, lighter weight and easy to carry. TPU puncture Resistant Material The new TPU material has good puncture resistance.lt is made in one piece, with no long seams around the circumference of the inner tube.There is only a ring of joints around the valve Reduces the possibility of air leakage Long-Lasting And Stable Tyre Pressure Resistant to high and low temperatures, stable tyre pressure ensures your safety when going downhill. Reinforced valve interface technology Three times reinforced seal for the easily damaged and irreparable valve connection, which has been tested and will not leak even if pulled hard for more times.